home *** CD-ROM | disk | FTP | other *** search
/ NetNews Offline 2 / NetNews Offline Volume 2.iso / news / comp / sys / amiga / hardware-part1 / 4068 < prev    next >
Encoding:
Internet Message Format  |  1996-08-05  |  2.0 KB

  1. Path: ccnet.com!usenet
  2. From: slider
  3. Newsgroups: comp.sys.amiga.hardware
  4. Subject: Re: A3000T Jumper?
  5. Date: 11 Feb 1996 16:26:01 GMT
  6. Organization: Jay Miner........Father of great things and a true engineering visionary...he is sorely missed around the world
  7. Message-ID: <4fl5ap$9pk@ccnet2.ccnet.com>
  8. References: <4fghtq$dbj@rs18.hrz.th-darmstadt.de>
  9. NNTP-Posting-Host: h108-14-206.ccnet.com
  10.  
  11. ->   niels@rbg.informatik.th-darmstadt.de (Niels Knoop) writes:
  12. ->  Could someone be so kind as to post or send me a list of the jumpers
  13. ->  in the A3000T and what they do? Sorry to bother you, but I've just
  14. ->  got one to evaluate and have some problems, but no manual. Everything
  15. ->  that deals with the CPU board connector or the Zorro slots would be
  16. ->  of special interest to me. Thanks in advance!
  17. ->  
  18. ->  -- 
  19. ->  | Ciao!   /// Niels Knoop ///  e-mail:
  20. ->    niels@rbg.informatik.th-darmstadt.de |
  21. ->                                        --
  22. ->  
  23. ->  
  24. ->>>>
  25. This seems to be a prevalent question on the NET...The easy answer
  26. is to pick up the A3000T service manual available thru many mail
  27. order companies.... COPYRIGHT willing (I still need to contact AT)
  28. I will scan the appropriate pages from the A3000T service manual and
  29. post them here and upload them to AMINET.
  30. Also if anyone has the service manual (not user) to the A2386 bridgeboard,
  31. it would be most appreciated.  I am working on a design to convert the
  32. 1x4 ZIPP slots on the A3000T to accept standard 72pin SIMMS. So far so
  33. good in that the signal and address lines are easy to port over jsut getting the
  34. required connectors and making it as small as possible (noise) will be a little hard.
  35. Initially I'm thinking of using a SIMM tower holder that can hold up to 4 72pin 
  36. SIMMS, I just need to make the bridge from the 72pin connector to the ZIPP
  37. pinouts. Anyone who can help me in this project please contact me via E-mail
  38.   
  39.                                     Thank You,
  40.                                                        James Vigliotti
  41.                                                        slider@ccnet.com
  42.  
  43.